msgbartop
Provides Technical Information of GPS Receivers & Data Logger
msgbarbottom

30 Jan 11 How to pair a Bluetooth GPS with a Mac computer?

1. Make sure you have an internal Apple Bluetooth module installed in your computer
2. Open “System Preferences” and click “Bluetooth”
3. Select the “Devices” tab
4. Click “Set Up New Device”
5. The “Introduction” page is displayed. Click “Continue”
6. Select “Any Device” and click “Continue”
7. Select the proper Bluetooth GPS device
8.    Click “Passkey Options”
9. Once again the Bluetooth Device Setup is displayed and immediately. Clicks “Continue” . Enter the Passkey Code (or PIN code) “0000” and click “continue”. For B-Speech keychain Bluetooth GPS 20c which is 1234.
10. Click “Quit”

30 Jan 11 How to download log data to a Mac computer if your logger does not come with a Mac driver?

HoudahGeo – You can use this program to download MTK base GPS logger data to your Mac computer. http://www.houdah.com/houdahGeo/
It is driverless for most MTK base GPS loggers. (e.g. Qstarz GPS loggers)