Provides Technical Information of GPS Receivers & Data Logger

31 Jan 11 The GPS driver installed successfully, but the GPS application software fail to recognize the GPS. How to correct this problem?

1. Please open the “device manager” on your PC. In the “Ports (COM & LPT)” section, please noted down the COM port of the GPS device.  For example, the COM port is COM15 on below picture.

2. Manually select the corresponding com port in your GPS application software. For Example.

31 Jan 11 How to know whether the GPS driver successfully installed on my PC?

Please open the “device manger” on your pc & check “Ports (COM & LPT)” section. If you see “GPS USB Serial Interface Driver, which means the driver installed successful. Vice versa. Please refer to following example.

30 Jan 11 How to pair a Bluetooth GPS with Windows PC?

1.        Click the Bluetooth icon in the right-bottom of the screen
2.        Turn Bluetooth adapter ON
3.        Click the Bluetooth icon again and select “Add a Bluetooth Device”
4.        Check “My Device is set up and ready to be found” in the “Add Bluetooth Device Wizard” and Click “Next”.
5.        Select “New Device” from the displayed Bluetooth devices and click “Next”.
6.        Select “Use the passkey found in the documentation”.
7.        Enter the Passkey Code (or PIN code) “0000” and click “Next”. For B-Speech keychain Bluetooth GPS 20c which is 1234.
8.        Bluetooth Manager will display and designate an Outgoing and Incoming port for your device. Use this Outgoing port for the mapping software port configuration.
9.        Click “Finish”